Liquid Analysis – Vishnupriya Industrial Solutions

Liquid Analysis

Online Analysis

Ammonia

Ammonia Sensitive Sensor

Monitoring ammonia leakage in refrigerating plants
Applicable for a medium temperature of at least -8 °C
Special PTFE membrane
Easy replacement of membrane

Ammonia Transmitter/Controller

Plain language operation, multilingual
Graphic display with backlight
Easy to install plug-type terminal strips
Electrode monitoring

Ammonia Accessories

Installation of probes 120 x 12 mm possible
For 1 and 3 probes with Pg13.5 connection
Favorable chemical compatibility
Perfect probe protection
Various process connections

Oxygen (dissolved)

Oxygen Measuring Cells

Use of indicating device/controller AQUIS 500 RS according to data sheet 202569
Low operating costs due to reduced maintenance requirements (no electrolyte changes and no polarization voltage)
Greater calibration intervals due to lower drift behavior
High measuring accuracy even for low concentrations
Short response time
No minimum inflow (no oxygen consumption)
Secure, digital measured value transmission

Oxygen Transmitter/Controller

Plain language operation, multilingual
Graphic display with background lighting
Calibration routine for dissolved oxygen, chlorine, total chlorine
Surface-mounted case protection type IP 67

Oxygen Accessories

Measurement of dissolved oxygen (DO) in aqueous solutions
Safe 1-point calibration
2-wire transmitter (for basic and standard version)
Electrical isolation of measurement signal (DO) and output signal (mA)
Easy connection to an existing system (e.g PLC)
Can be used as stand-alone system in maximum version
Compensation of temperature, atmospheric pressure and salinity
Further processing of the temperature of the medium is possible (separate Pt 1000 or 2-wire transmitter)

TSS/Silt/Sludge blanket

Total Suspended Solids

Optical sensor based on absorptiometry
Range of measure
SS : 0-50 g/L
Sludge blanket 0-100 %
Turbidity 0-4000 FAU
Digital communication Modbus RS-485
Strong sensor

Silt Measuring Instrument

Two probe types, 1.6 and 5.0 mm (ID) tubing
Easy to clean probe parts
Exchangeable transmitter and receiver
Electronics insulated from medium
Immersible version available

Sludge blanket

Optical sensor based on absorptiometry
SS : 0-50 g/L
Sludge blanket 0-100 %
Turbidity 0-4000 FAU
Digital communication Modbus RS-485
Strong sensor

Portables

Micro 800 Conductivity/TDS

Conductivity 0 – 200,000 µS/cm, 0 – 200 mS/cm
Total Dissolved Solids (TDS) 0 – 200,000 mg/L, 0 – 200 ppt
Salinity 0 – 50.00 ppt
Temperature -10 ⁰C to 110 ⁰C

Micro 800 Multiparameter

pH -2.00 to 16.00
Oxidation Reduction Potential (ORP) -2000 to +2000 mV
Conductivity 0 – 200,000 µS/cm, 0 – 200 mS/cm
Total Dissolved Solids (TDS) 0 – 200,000 mg/L, 0 – 200 ppt
Temperature -10 ⁰C to 110 ⁰C

Micro 800 pH

Dissolved Oxygen 0.00 – 20.00 mg/L, 0 – 200% saturation
Temperature 0.0 – 100 ⁰C